ac/ac-docs
1
0
Fork 0
mirror of git://f0xx.org/ac/ac-docs synced 2026-07-29 05:18:46 +03:00
Code Issues Packages Projects Releases Wiki Activity
Files
b9cb493ad6cc92f4fb84cb3d94c8aaa105a28836
ac-docs/DRs/20260616_rssh_routed_egress.md
Anton Afanasyeu 69a448f156 initial
2026-06-23 12:20:43 +02:00

15 KiB
Raw Blame History

RSSH routed egress (dev-only) — design review (DR)

Field Value
Author Anton Afanasyeu
Revision R0
Creation date 2026-06-16
Last modification date 2026-06-16
Co-authored Cursor Agent (project assistant)
Severity low
State postponed
Document type DR
Pre-requisite to Finish WireGuard remote-access E2E (REMOTE_ACCESS_VALIDATION.md, VPN_DEMO_GAPS_20260613.md)

\newpage \newpage

Document type: DR (Design Review)
Source draft: docs/drafts/20260616_rssh_routed_egress.txt
PDF: 20260616_rssh_routed_egress.pdf · Regenerate: bash scripts/build-all-docs-pdf.sh
Status: Draft for PO review — no implementation until WireGuard track is closed
Scope: Developer settings only; optional future path; does not replace alpha RSSH (reverse tunnel, no VPN)

Related: REMOTE_ACCESS_IMPL.md · 20260602_REVERSE_SSH_proposals_summary.md · ROADMAP.md (RSSH alpha)

Documentation index: README.md

Table of contents

1. Executive summary

Question: Can we add a developer-only, system-wide VPN-style path that routes part or all device traffic through the RSSH (reverse SSH) session?

Short answer: Yes, technically — but it requires a new data plane (VpnService + IP-to-SOCKS or TUN-over-SSH), not an extension of today’s RSSH -R forward. It reintroduces VPN permission and the status-bar key, and overlaps WireGuard full-tunnel, which already implements route/app scope in the app.

DR decision (R0):

Item Decision
Timing Postponed until WireGuard remote-access work is finished and validated E2E
Alpha RSSH Unchanged — outbound reverse SSH for operator → device; no device routing
Near-term routing Use WireGuard + RemoteAccessVpnRouting (hub-only or full-tunnel)
If revived Dev-only sub-mode “RSSH + route traffic (experimental)” via SSH dynamic forward (-D) + tun2socks + existing route/app prefs
SPEC Do not write implementation SPEC until PO confirms after WG closure

2. Problem statement

Developers may want:

  1. Operator access to the device (shell/SFTP) — RSSH today.
  2. Device traffic to egress via the hub (e.g. Minsk NAT) or reach hub-private IPs — WireGuard today (split or full tunnel).
  3. In some networks, UDP WireGuard may be blocked while TCP 443 SSH works — motivation to explore routing over RSSH.

Without a clear DR, it is easy to assume vpn-route-scope / vpn-app-scope apply to RSSH; they currently apply to WireGuard only (REMOTE_ACCESS_IMPL.md).

3. Vocabulary and scope

Term Meaning here
RSSH Device-initiated reverse SSH; -R bastion:port → device:8022 for operator access
Routed egress Device IP traffic (some or all) sent through bastion/hub NAT to the Internet or private nets
VpnService Android API for app-provided VPN; required for system-wide or per-app routing from our app
Route scope Hub-only (172.200.2.1/32) vs full-tunnel (0.0.0.0/0) — RemoteAccessVpnRouting
App scope All apps vs this app only — IncludedApplications / addAllowedApplication

Not in scope for this DR: Commercial VPN product (F4), always-on VPN in Android Settings, routing for non-developer builds.

4. Current state

flowchart LR
  subgraph phone [Device]
    RA[RemoteAccessService]
    WG[WireGuard :vpn]
    RSSH[ReverseSshTunnelBridge]
    LOCAL[RsshLocalSshServer :8022]
  end
  subgraph be [BE / bastion]
    WG0[wg0 UDP 45340]
    SSHD[sshd TCP 443]
  end
  RA -->|mode wireguard| WG
  WG -->|UDP| WG0
  RA -->|mode rssh| RSSH
  RSSH -->|TCP -R| SSHD
  SSHD -->|operator| LOCAL
Mode Transport Device routing VPN icon
WireGuard UDP → wg0 Yes (hub-only or full) Yes
RSSH TCP → sshd No No

Existing prefs (dev_remote_access_vpn_route_scope, dev_remote_access_vpn_app_scope) are sent on heartbeat for WG; RSSH ignores them.

5. Goals and non-goals

Goals (if implemented later)

ID Goal
G1 Optional dev-only routing of device traffic via TCP 443 SSH path
G2 Reuse route scope and app scope semantics from RemoteAccessVpnRouting
G3 Network self-test shows bastion, bind ports, egress expectation (like WG vpn-ip)
G4 Clear separation from alpha RSSH (reverse access only)

Non-goals

ID Non-goal
NG1 Replace WireGuard for production/lab routing
NG2 Alpha release blocker
NG3 Avoid VpnService.prepare() — routed mode will need it
NG4 SSH PermitTunnel / ssh -w as v1 (too heavy for Alpine bastion v1)
NG5 Third-party “VPN provider” in Android Settings (no such API; we use VpnService)

6. Architecture options

6.1 Option A — WireGuard full-tunnel (existing)

Use when: Hub egress or full WAN via Minsk NAT is needed now.

  • Dev settings → WireGuard → route scope All traffic → reconnect session.
  • BE wg0 PostUp MASQUERADE already documented.
Pros Cons
Implemented UDP DNAT + VPN consent
Kernel/userspace WG Not RSSH transport

Verdict: Default for routing until WG track is done.

6.2 Option B — RSSH + SSH -D (SOCKS) + VpnService + tun2socks

Use when: PO explicitly needs TCP-only routing and accepts VPN icon + extra stack.

flowchart TB
  subgraph device [Device]
    TUN[VpnService TUN]
    T2S[tun2socks userspace]
    SOCKS[127.0.0.1:SOCKS]
    JSch[JSch session]
  end
  subgraph bastion [Bastion / BE]
    SSD[sshd]
    NAT[NAT egress eth0]
  end
  TUN --> T2S --> SOCKS --> JSch --> SSD --> NAT
  1. Extend ReverseSshTunnelBridge: keep -R for operator; add -D 127.0.0.1:<socks_port> on same session.
  2. New RsshRoutedVpnService (or branch in :vpn) establishes TUN with routes from RemoteAccessVpnRouting.
  3. tun2socks forwards IP packets → local SOCKS → SSH stream → bastion → Internet.
Pros Cons
TCP 443 friendly VPN permission + icon
Reuses SSH session tun2socks dep + licenses
Reuses route/app prefs TCP-over-TCP, MTU, battery
Bastion egress policy + capacity
JSch dynamic forwarding QA

Verdict: Reference design if PO revives routed RSSH.

6.3 Option C — SSH layer-3 tun (ssh -w)

Both ends need TUN, PermitTunnel, root/capabilities on bastion, custom Android client.

Verdict: Reject for dev-only v1 (operational cost).

6.4 Option D — Hybrid (proposal doc)

WG for packets + RSSH (or SSH over WG) for operator files.

Verdict: Valid long-term; does not require RSSH alone to carry IP routing.

6.5 Comparison matrix

Criterion A WG B RSSH+SOCKS C ssh -w D hybrid
Ready today Yes No No Partial
TCP 443 only No Yes Yes Mixed
VPN icon Yes Yes Yes Yes
Alpha RSSH purity N/A Weakens if default Weakens OK
Impl effort Done High Very high Medium

7. DR recommendation

  1. Close WireGuard E2E (peer reconcile, self-test vpn-ip, hub→phone diagnostics, full-tunnel egress check) — current priority.
  2. Keep alpha RSSH as reverse tunnel only (ROADMAP.md).
  3. Park Option B in this DR; PO reviews §16 and decides go / no-go after WG.
  4. If go: spawn SPEC rssh_routed_egress (dev-only feature flag), not a change to core RSSH connect payload for alpha.

8. Reference design (if pursued later)

8.1 Control plane

Unchanged: heartbeat.php type: ra, tunnel: ssh_reverse, credentials for bastion + -R port.

Optional dev flag in heartbeat meta: rssh_route_experimental: true (telemetry only; no BE requirement for v0).

8.2 Data plane

Step Component
1 ReverseSshTunnelBridge connects; -R as today
2 Same session: session.setPortForwardingD("127.0.0.1", socksPort) (JSch)
3 RsshRoutedVpnEngine starts TUN via VpnService
4 tun2socks reads TUN, connects to 127.0.0.1:socksPort
5 Bastion sshd forwards; iptables MASQUERADE on bastion for egress

8.3 Routing semantics

Reuse RemoteAccessVpnRouting.resolveAllowedIps():

Route scope TUN routes
HUB_ONLY 172.200.2.1/32 (or configured hub CIDR)
FULL_TUNNEL 0.0.0.0/0, ::/0

Reuse appendInterfaceExtras() for THIS_APP_ONLY.

Note: Hub reachability over RSSH may need explicit route to hub IP via TUN or SOCKS; validate that hub-only does not assume WG interface addresses.

8.4 Failure modes

Symptom Likely cause
SOCKS up, no Internet Bastion NAT / forwarding disabled
Tunnel up, wrong egress IP Route scope hub-only (expected)
Intermittent stalls TCP-over-TCP congestion
VPN works, operator SFTP dead -R forward dropped; session limits

9. Developer settings UX

Proposed (not implemented):

Remote access mode: [ Disabled | WireGuard | RSSH ]

— When WireGuard —
  VPN route scope: Hub only | All traffic
  VPN app scope:   All apps | This app only

— When RSSH —
  [ ] Route device traffic via bastion (experimental)
      (shows route/app scope only when checked)
  Hint: Reverse tunnel for operator access is always on in RSSH mode.
        Routing requires VPN permission (same as WireGuard).

Network self-test (RSSH + experimental): rssh-bastion, rssh-remote-bind, rssh-socks, wan-egress-via-vpn, rssh-connected.

10. Backend and bastion requirements

Requirement Notes
AllowTcpForwarding yes Already for -R
Dynamic forwarding Confirm sshd GatewayPorts / no restrictive Match block for -D
Egress NAT iptables/nft MASQUERADE on bastion (similar to wg0 PostUp)
Capacity Routed dev traffic adds bandwidth; separate from §12.1 RSSH SSH counts in scaling DR
Audit Log experimental flag; no change to alpha session schema required

No new nginx HTTP paths; optional stream unchanged.

11. App components (sketch)

Component Process Role
ReverseSshTunnelBridge main SSH session; -R + -D
RsshRoutedVpnService :vpn TUN + lifecycle
RsshTun2SocksEngine :vpn Packet relay
RemoteAccessVpnRouting shared Route/app scope
DevVpnStatusProbe main Diagnostics

Do not fold into WireGuardVpnEngine; separate engine behind common VpnServiceClient interface if refactored later.

12. Third-party and licenses

Candidate License Action if adopted
badvpn / tun2socks Various Evaluate; add to third-party/, mobile + BE license files
JSch BSD Already in app; verify -D support
Apache MINA SSHD Apache-2.0 Local server only today

Update COMMERCIAL.md and app/src/main/assets/licenses/ before merge.

13. Risks

Risk Mitigation
Duplicates WG PO go/no-go; default to WG
Alpha scope creep Dev-only flag; off in release if needed
VPN consent UX regression Document in FR; separate from “no VPN” RSSH story
Bastion abuse (open egress) Dev whitelist + session TTL + rate limits
Maintenance burden Two routing stacks

14. Effort estimate (order of magnitude)

Phase Work Duration (indicative)
P0 WG E2E closure Current sprint (PO priority)
P1 Spike: JSch -D + manual SOCKS browser test 2–3 d
P2 tun2socks + VpnService + route prefs 5–8 d
P3 Bastion NAT + self-test + docs 2–3 d
P4 Unit/integration tests, soak 3–5 d

Total if pursued: ~3–4 weeks after WG done — not parallelized with WG closure unless PO overrides.

15. Task dependency graph

Legend: blocked by upstream task.

flowchart TD
  WG1["1. WG peer reconcile on BE deploy"]
  WG2["2. WG E2E phone ↔ hub"]
  WG3["3. WG full-tunnel egress validation"]
  PO["4. PO review this DR"]
  GO{"5. Go routed RSSH?"}
  SPIKE["6. JSch -D spike"]
  SPEC["7. SPEC rssh_routed_egress"]
  IMPL["8. Implement dev experimental mode"]

  WG1 --> WG2 --> WG3 --> PO
  PO --> GO
  GO -->|no| PARK["Park — use WG only"]
  GO -->|yes| SPIKE --> SPEC --> IMPL
Priority Task Owner State
1 Finish WG (peer sync, ping/handshake, self-test, full-tunnel) Dev/PO In progress
2 Review DR R0 PO Pending
3 RSSH routed egress — Postponed

16. Open questions (PO)

# Question Default if silent
Q1 After WG E2E, is TCP-only routing still a requirement? No — stay WG-only for routing
Q2 Accept VPN icon for an experimental RSSH routing mode? Required for Option B
Q3 Should hub-only over RSSH target 172.200.2.1 without WG? Clarify use case
Q4 Bastion egress NAT for dev traffic — allowed on prod be-vpn? Lab-only
Q5 Single SSH session for -R + -D or two sessions? Prefer one session

17. Changelog

Rev Date Change
R0 2026-06-16 Initial DR from PO question; postponed pending WG closure

Related docs

Reference in New Issue View Git Blame Copy Permalink